>> 中文版 >> English


AF Yahui Cooperation Brands And Customers

(In Alphabetical Order)














(On The Ownership Of Trademark Or Logo Lor Its Holders)

The purchase and maintenance of furniture

 

furniture optional:
1, is used to distinguish furniture paper veneer or wood veneer, which is more difficult. The easiest way is to observe the pattern, there is a natural wood veneer knots, color and texture changes.
2, furniture edge sealing is very important. Pay attention to sealing material merits attention Edge there is not flat, tilt phenomenon. In particular, note that it is not the six sides Edge - While using a formaldehyde-free adhesive, but the plywood in the production process will be more or less volatile gases, sealing tight, on the living room Of course, environmental benefits.
3, depends on the structure of the solidity of furniture. First, the furniture door drawer sewing gap, if the gap large, indicating rough work, a long time will be deformed; two single-pack boxes or double pack boxes, usually, in addition to outside layer board, the furniture, which also should be covered with a thin panel, called dual-pack boxes, double-pack boxes of furniture both beautiful and strong.
4, paint is good or bad, of course also bear. Pigments have streaks? Angular position of the pigment is coated too thick? Cracks or bubbles do? These are carefully view. Had asked the salesperson, a few furniture finishes. Of course, is the number the better.
5, from the hinge slots and drill can be seen at the furniture or timber is medium density particleboard, a better approach is to careful observation at the hinge slots and drill bare the internal structure of the place, you can see with a particleboard or MDF.
6, Hardware usage, can easily disassembly and assembly of the biggest advantages is the furniture, so the quality is good or bad and fittings closely related to the quality of the furniture. Imported furniture in these minutiae your on your

furniture use and maintenance:
1, Furniture shall not be placed in the high temperature, humidity, vibration, light, strong place. Direct sunlight, the sun will always fade furniture, paint film, easily oxidized metal fittings deterioration, wood is easy to crisp. Summer is best to use curtains cover the sun, to protect furniture. Room should be ventilated cool.
2, when cleaning the furniture, and the like should be flexible with the feather duster apparatus for clearing dust, use a soft cloth lightly wipe.
3, hard or sharp objects to avoid collision furniture, avoid tapping the surface of glass or metal ornaments.
4, Furniture metal ornaments simply wipe gently with a dry towel, you can not use cleaners containing chemicals, do not use acidic liquid cleaning. Surfaces such as metal ornaments appear difficult to remove the black spots that can be used kerosene to clean, clean.
5, furniture fittings regularly inspected and found loose timely reinforcement.
6, furniture used towels moistened with water or a mild detergent for cleaning, the plate can be carried out regularly with furniture wax nursing care, and keep the inside clean.
7, furniture edges where there is cocked and separation can be cast in the above thin cloth, then with an iron ironing restored.
8, furniture if any scratches or bumps, can paint the same color complementary color.
9, as their disassembly, assembly, resulting in product dislocation, failure or damage, shall promptly notify the store for assistance.
10: placing furniture on the ground must be kept flat, four legs balanced ground. furniture placement after the event, is often sway swing limbo, falling off is bound to make tenon or fasteners, adhesive partially cleaved, thus affecting the use of effects and lower furniture life. Additionally, if the ground is soft so that the furniture imbalance, do not use wood or iron furniture pads legs, so even maintain balance, it is difficult even by force, long down will damage the internal structure of furniture The only way to compensate is to trim the ground, or slightly larger than the area of the hard rubber plate shop in the south to make furniture, four legs smooth landing.
11: in the dust on the furniture removal is best to use cotton knitted fabric, and then use soft wool brush to remove dents or relief ornamentation in the dust. After paint handling of the furniture, avoid using gasoline or organic solvents to clean, can wipe colorless wax furniture polish to enhance the luster to reduce dust.

Shenzhen Yahui Indestrial Development CO., LTD

ADDIndustrial Village, Longgang District, love Cheung Pui Road 80    ZIP:518116
TEL:+86-755-61213622 61213222 61213638                                 FAX:+86-755-61213639
E-mail:yahui111@163.com    sales@yahui.cn                                          WEB:Http://www.yahui.cn

AF Yahui Cooperation Brands And Customers

(In Alphabetical Order)

All Rights Reserved  ©  2013 Shenzhen Yahui Industrial Development CO.,LTD

TEL:+86-755-61213638 61213222 61213622  ADD:Shenzhen Longgang 

FAX:+86-755-61213639   E-mail:yahui111@163.com   sales@yahui.cn   WEB:www.yahui.cn

      Address And Route