buy solid wood furniture:
three watch
look material.
Generally good furniture, open doors, drawers, its wood dry, white, texture clear, clear, close texture, fine. While those from the inferior material from the processing of furniture is unable to achieve these levels. While good furniture requires opening doors or drawers, you can not have any irritating odor.
watch components.
View Furniture parts of the force (sofa legs, columns, close to the ground connection between the column bearing bars, etc.), to ensure that no large knots or cracks, cracks. View the sliding drawer and positioning, open all doors and drawers, make sure they are installed properly, using harmless. Particular attention to the junction of heavy furniture components, screw cap should be tightened. View all uses plywood furniture components, has been implemented to ensure that its edge treatment, to ensure that a variety of accessories installed a lot of pieces, not missing nails without nail through.
see Origin
Because the moisture content of wood furniture is affected by its origin, while high moisture content using the regional average moisture content of more than 1% of the furniture will be cracking, deformation, fall apart, warping and other phenomena, so it is best to buy a good drying process the production of furniture, domestic or foreign production is not important, the key is its moisture content to be used with regional average moisture content consistent.
two touch
Touch surfaces
Look polished surface is smooth, to see if there can be broken clothes hook projections.
touch table legs
Grandstand feet and other parts are rough, angular position of the pigment to see if applied too thick.
a pressure
Gently press each force point of furniture, such as the column angle, drawer or shelf support, etc., to test whether stable. Furniture surfaces with a beat can not have empty untrue, panel trembling feeling. Glimpse of the mystery is solid wood and scar knot. Such as a door, looks is a pattern, then the corresponding change in the position of the pattern in the back door to see the corresponding pattern, if the corresponding well is pure solid wood doors. Another look scar knot is a good way to identify pure wood: promising a scar on the side position, and then on the other side to find whether there is a corresponding pattern. Solid wood furniture is made from natural wood furniture, wood furniture generally can see the surface of the real texture. In fact, solid wood furniture on the market today are basically two kinds: one is pure solid wood furniture, solid wood furniture are all timber, including the desktop, cabinet doors, side panels etc. pure solid wood, do not use any other form of artificial plate; Another is imitation wood furniture, that is from the natural appearance of wood texture, feel and color and furniture are exactly the same, but is actually made of solid woods and wood mixed furniture, such as side panels, shelves such as the use veneer particleboard or medium density fiberboard, legs and back are solid wood. From the color analysis, solid wood furniture enduring reason is that it's wood color. Wood color furniture, wood color walled, natural color popular decorative materials, both natural, nor chemical pollution, which is really a healthy fashion choices, in line with modern urban people advocating the psychological needs of nature. Second, in the choice of material for the domestic wood furniture, for example, the main types are: beech, teak, maple, oak, oak, ash, elm, poplar, pine, of which the beech, oak, Ash is most valuable. These materials from nature, reflecting the harmonious relationship between people and the environment, designers love to use these materials, then add people-oriented, nature-based modern design, it is more narrow and the material, human and natural distance, giving a kind of intimacy.
wood furniture maintenance:
Hardwood furniture including pear, red sandalwood, mahogany, wenge, pear and so on, if you use protection and reasonable principle be handed down long-term use, maintenance methods:
1, Now there are two kinds of hardwood furniture, traditional hardwood furniture general surface without paint, just hot wax. Now the new production of hardwood furniture surface lacquer or varnish protection. Different treatment of hardwood furniture and maintenance methods are different.
2, Hardwood moisture within the air humidity is too low, hardwood furniture will shrink, swell is too high. Usually when there is hardwood furniture production rose shrink layers, but when using the display should be noted, do not put too wet or too dry place, such as near the stove heating at high temperature heat, or too wet basements and other places, to avoid mildew or chapped.
3, If it is low-lying cottage house, wet ground shall appropriately padded furniture legs, Otherwise legs are prone to damp air corrosion.
4, when handling or moving furniture, gently, not Shenglayingzhuai avoid damage tenon joint structure. Chairs class can not lift surface, easy to fall off, it should be from both sides of the table and chairs under the surface lift, remove the cabinet doors and then lift the best, you can reduce weight, but also to avoid door activities. To move particularly heavy furniture, use a soft rope set into the lift before moving furniture under the chassis.
5, furniture surfaces to avoid long-term placement too heavy items, especially television, fish tank, make furniture deformation. Shop on the desktop should not airtight material like plastic sheeting.
6, rooms such as uneven floors, a long time can cause deformation of furniture, avoiding approach is to use a small piece of wood pad level.
7, is definitely not a wet rag or cloth to wipe rough hardwood furniture, especially the old furniture. With a clean, soft cotton cloth, over time, add a little furniture wax or walnut oil, wipe gently back and forth along the grain.
8, furniture surfaces should avoid friction with hard objects to avoid damage paint and wood surface texture, such as placing porcelain decorative bronzes Items should be particularly careful, it is best to pad a soft cloth.
9, avoid putting furniture in large south-facing windows in front, long-term direct exposure to sunlight causes the furniture is too dry, will fade.
10, hot cup can be placed directly on the surface of the furniture will be easy to remove without leaving traces. Colored liquid, such as ink, etc. should absolutely avoid spill on the desktop.