|
Four Points wood furniture selection
wood furniture purchase four Note:
It is understood that the current furniture market, wood furniture as fashionable, colorful, clear wood furniture category, etc. have become the major categories of products. Coupled with the relatively modest prices, more and more consumers. Experts suggest that consumers buy wooden furniture, wooden furniture, understand and master the technical requirements and distinguish their advantages and disadvantages, is the right to buy wood furniture an effective manner.
focus on surface quality:
Wood furniture, plywood furniture, particleboard, medium density fiberboard and other wood-based panels to the substrate surface, decorated with melamine, PVC, wood veneer and paper veneer wood and other cover, imitation wood-shaped pattern is clear, natural, smooth , have a good visual effect and feel. Purchase of furniture furniture materials used mainly to see whether there are scratches the surface of the plate, indentation, bubbling, unglued from the leather and plastic signs and other defects.
focus on production quality:
Wood furniture in the production is in the shape of the plate after cutting saws, decorative edge, parts assembled combination. Look plywood furniture production mainly depends on the quality of its cutting saws, edge, surface quality and decorative plates ports. Plate in the Conference saw parts of the plate flatness, squareness, right angle has quality requirements, general plate cutting saw less than 0.01 mm per meter of sheet metal to achieve precision saw cutting back profile formation, right angle Good, furniture made after the phenomenon does not appear inclined plate. Edge, surface decoration decorative parts mainly to see whether the uniform coating, bonding is strong, trimming it smooth, spare parts side panels, door panels, drawer panels and other visible parts of the exit at the other end is edge treatment, decorative excellent profile on the touch panel side no traces of adhesive. Assembled combination mainly to see whether the drilling at the mouth of the fine, clean, connectors are firmly installed, the plane face connected with the T-shaped joints have no gaps, there is no loosening hand to promote. Doors, drawers parting whether the gap is too large, the general requirements specified as 1.5mm to 2.0mm, between the open sliding doors and drawers are flexible and comfortable and so on.
Focus on metal parts, plastic parts quality.
Wood furniture often used in metal and plastic pieces as the fastening connector, so the quality of metal parts also determine the intrinsic quality quality wood furniture. Metal parts required smart, smooth, surface plating is good, can not have rust, burrs, etc., with high precision parts. Plastic parts to be handsome and beautiful, colorful, use the focus position to have strength and elastic, not too thin. Open-type connector requires rotating flexible, spring-loaded to the internal elastic appropriate, such furniture in the open will be a smooth, easy, no friction sound.
focus on main dimensions:
Wooden furniture on the market today mainly furniture and bedroom sets office furniture. There is also multifunctional video electrical cabinets and other products. Its main dimensions of furniture (ie, functional size) are the national standards requirements. Such as large wardrobe closet hanging space within the specified depth should be greater than or equal 530mm, long hanging clothes hanging clothes stick to the bottom plate along the upper surface spacing should be greater than or equal 1400mm, height of desk furniture provides 680mm to 760mm, in which the middle desk drawer down to ground level along the middle of the high clearance should be greater than equal to 580mm, bookcases layer between high clearance should be greater than or equal 230mm to 310mm and so on. Main dimensions referred to above, mainly referring to the furniture purchase to pay attention to understand, because the furniture if less than the required size, use will bring a lot of inconvenience, affecting the use of furniture. Such as depth of wardrobe space for hanging clothes too small will affect, causing the door is closed no upper phenomenon.
smells knowledge wood:
For the majority of the consumer with speaking, impossible to recognize all of the solid wood, it should remember the following:
Have wooden stand stubble look into a circle or curved lines arranged pinhole (pores) whether the rules to see whether the wood between the layers into a line or curve, if these lines can determine is based panels (veneer), because the real solid wood except rosewood, camphor spent outside the lines is not pretty.
Wen pure wood has its own special flavor, even after long-term storage or finishing the smell is still left, and there are a lot of wood will retain a touch of flavor, such as pine resin flavor, there is light incense cedar, cedar, spicy flavor, fir with distinctive odor, camphor camphor flavor will be very obvious, basswood slight oil odor, Redwood's incision will have a strong spicy aroma, walnut choking slightly nose, a lot of domestic timber does not smell, and artificial board will have a very strong smell of chemicals, such as formaldehyde, ammonia and other three Lu hydrogen would be good recognition.
Knock on wood parts will be issued by hand tapping sound more crisp, and wood-based panels are a low voice, and the boxes of wood pieces will be issued thunderous drums.
Divided by the weight of the timber weigh three. Lightweight paulownia wood has dried, the heavyweight pine, basswood, autumn wood, etc., in northern China in the density of the wood called soft hardwood (except pine outside), except heavyweight mahogany, rosewood, rosewood and other hardwoods, the oak, ash and birch and imported lauan are called hardwood, wood furniture than the sum of particleboard, medium density fiberboard furniture lighter
furniture environmental protection:
friendly furniture choices to make in three main areas, the first one is the most important aspect of the plate, because the furniture environmental performance mainly reflected on the plate, a good board particularly low formaldehyde content, the main in three, E2 level which is consistent with national standards, E1 grade line with European standards, E0 class is among the most environmentally friendly world-class standards.
China is now able to achieve the production of sheet metal with no E0 class, a few of one, two can reach E1 class. European forest resources are relatively rich country imports most of the plate can reach E1 standard, which is selected from the plate. If the conditions above must choose E1 class, and better environmental performance. E2 ,10-30 mg / 100 g; E1, less than or equal 1.5 mg / L; E0, less than or equal to 0.5 mg / L. Second from the finish, the finish on a good plate facing enterprise compare with scratch-resistant wear without fading. First, some poor finishes wear enough, two in three to six months, then gradually fading, yellowing effect.
Buy green furniture attention to the problem, first look at the color plates, pick their favorite pop color, but also a close look at the production process, including Edge, furniture structure is reasonable, the use of hardware mainly focused durable coefficient, general import of hardware life is thousands of times, the equivalent of two years.
The second is to look at news, environmentally friendly furniture should be no irritating smell, does not irritate the eyes, nose, and throat. Wen came mainly for formaldehyde emission, environmentally friendly furniture increasingly lower formaldehyde content is good, but it is as low as possible while ensuring the strength. It is recommended to look at the news the same time the certificate presented manufacturers, undertakings do not trust the formaldehyde content of the furniture for the authority to manufacturers for testing. Furniture depends on the question sheet to see a cross-section equal to the inside surface of really good, really fresh green sheet is made of wood, so the cut to be able to see the white of fresh substrate, more uniform particles
|
